WAGO - 750-362 FIELDBUS COUPLER MODBUS TCP, 4TH GENERATION, ETHERNET, 24 VDC, 700MA, I/O SYSTEM

Fieldbus Coupler Modbus TCP, 4th Generation

The 750-362 Modbus TCP/UDP Fieldbus Coupler has been designed to connect ETHERNET to the modular WAGO I/O System. This versatile fieldbus coupler detects all connected I/O modules and creates a local process image.

Up to two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches or hubs.Both interfaces support autonegotiation and Auto-MDI(X).

The built-in DIP switch configures the last byte of the IP address and may be used for IP address assignment (DHCP, BootP, static). This industrial fieldbus coupler is designed for fieldbus communication in MODBUS networks.

Dependable, this coupler also supports a wide variety of standard ETHERNET protocols such as HTTP(S), BootP, DHCP, DNS, SNMP, (S)FTP). This device also features an integrated Webserver providing user configuration options, while displaying the coupler's status information.

The system supply is provided directly by the coupler and the field supply is provided via a separate supply module.

Fiedbus Coupler Technical Features

• Communication Modbus (TCP, UDP)
• Ethernet Protocols - HTTP(S), BootP, DHCP, DNS, SNTP, FTP(S), SNMP
• Baud rate 10/100 Mbits/s
• Number of modules per node – 250 Max
• Number of modules without a bus extension 64 max
• Supply voltage – 24 VDC
• Total current 700 mA
• LED Indicators
• Connection technology 2 x Cage Clamp, 1 male connector – 4 pole
• Solid conductor - 0.08 … 2.5 mm² / 28 … 14 AWG
• Fine-stranded conductor - 0.08 … 2.5 mm² / 28 … 14 AWG
• Dimensions HxWxD – 96.8 x 49.5 x 71.9 mm
• IP20 protection rating